You have expensive, out of print or vintage models can not bear to cut? The best way is to get your model in order to trace patterns on tracing cloth or paper.
Do you have a favorite pattern to use over and over again?
If the pieces are already cut, is a simple way to keep them around each piece model on a light, non-woven melt interface. Just cut a piece of interfacing the size of the part model and place the adhesive side on the wrong sidethe model of an ironing board. Set of synthetic iron (without steam) and secure the connection to the model in uniform, even strokes. Press until the design is completely in order to comply with the accessibility and finish the edges.
If the pattern is cut, glossy paper, or a copy of each piece is a great way to keep the original expensive, especially out of print and vintage models. A model of age is particularly gratifying, because you can cut, sew and enjoy your vintage styleRobe, while the model remains fragile parts of the model intact.Most printed on large pieces of tissue paper, as the current model in stores now tissues. On the trail of cut parts is a convenient way to make these models are often printed with a variety of formats and points of view on each reuse pattern. The persecution of the pattern pieces, and other points of view and different sizes of the same model, without the original cut, and you can always go back and do thethe same style for someone else.
Some models have four or five magazines or more models in different colors printed on a sheet, so you need to track where to use them at all. Other models are called "archetypes", and traceability is well, if you want to change the pattern of a dress without losing the original. Check the shape and try to make adjustments possible, while the track. For example, most of our standard adjustments, to make a model forArm, waist and hip size, etc. Instead of tracing the exact model, then take the adjustment, and gently bend the part of the original model and mark the end point, tracing paper and then move up or down and fill in the correct distance between them.
The materials used to track the patterns are different, the kit of tracing paper wrapped in fabric stores for food with wax paper, which is simple, through hard and see if a larger piece is necessary, onlyFuse two pieces with a dry iron set on wool. Other tools you need an iron, a pen, and French curve ruler.
Before drawing the picture, press each piece lightly with a model cold, dry iron (no steam - could reduce the size of the model) to remove any creases. Place the pattern on a smooth, hard, place the template on paper or tracing cloth and secure it with tape or weights. Do not use the French curve and ruler to cut the lines and the necessary information to keep track of settingsetc., and remember, each piece with the model number and see the labels, etc. Remove the tape, if used, and cut the two new model permanent. The original model remains intact and uncut.
If you are looking for quality models, make your own stylish aprons, bags, hats and accessories, children's clothes I hope to visit my eBay store. Where saving money is too good!
No comments:
Post a Comment